Browsing:

Tag: bob

Assault on Antioch Warn Order

AoA_poster2-big (1) A lot of folks who were not at Assault on Antioch were curious how the game was setup and what the specific objectives were. To give an overview, I’ve decided to post the Warn Order that was issued to game control in order to give a fuller view on what the weekend’s objectives were.

Before you read the Warn Order you might as well check out our first teaser video showing off some of the action footage from the game: Well, without further ado, here is the Warn Order:

Storyline:

A super volcano has erupted out of Yellowstone National Park, covering the majority of the United States in ash and darkness for an estimated three to five years. This has affected all aspects of normal every day life. Food prices have skyrocketed as crops are destroyed due to lack of sunlight. A majority of animal life in the Western United States is no longer able to sustain itself in an eco system that has been ripped apart, and the fabric of civil society has been rent asunder with the complete collapse of local and state governments.

Emergency sustainment zones have already been quietly built all across the United States for the continuation of the American way of life in just such a disaster. Unfortunately because of widespread civilian casualties and a nation-wide communications breakdown due to the volcanic eruption, basic civil services, power, as well as water infrastructure, along with the rule of law have collapsed all across the Western US. Groups of armed civilians flock to the last remaining shelters against devastation on the West coast.

The last remaining emergency sustainment zone remains open and untouched in Antioch, CA. Two caravans of armed civilians now head toward its fully stocked caverns from both the north and the south with room enough for only one group. The fight is on for survival. Do you have what it takes to weather the storm? (more…)


Operation Reclamation III AAR: British Reclamation Forces

For the first time the weather was warm, the British forces gathered to repeal the US forces. The British had started to settle Virginia, the airfield was cleared and ready to accept planes, thank you to the Royal Engineers for setting up the radar system and surface to air missiles. The US would certainly not have an air advantage. General Meerkat has his command post squared away some distance from the airfield. A hospital had been set up to accept wounded personnel as well as potential local casualties.

rec3

Intel had reported to General Meerkat that the US forces had been supplemented by two additional Platoons. Commander Chaos in charge of one, a Bob “The Axe man” and  a high ranking individual by the name of Daniel. After being repealed twice before the US forces were eager and ready to fight hard and expel the Brits.

rec3 11

The US had an elite SF unit deployed early to observe the Brits as they planned for the impending assault. The Brits had several squads with experienced Sgts at the helm, and supporting them were 3 crack units from the British Royal Marines, The Paras and the 22nd SAS.

rec3 2

 

(more…)


New Mechanix Gloves in Multicam coming out soon!

20140604_135347-1
The Multicam top in this picture is a very old and very faded piece of clothing from our studio so it doesn’t quite match the gloves because it’s been washed… a LOT.

Mechanix Gear is set to release 3 new sets of gloves before the end of June and I was lucky enough to get a set of them to try out just a few days ago… and I am one happy Bob 🙂

20140604_135712

Mechanix Gear makes great products and this is no exception. They are comfortable, dexterous, and are affordable enough for my own airsoft-related purposes! Over my decade-and-a-half plus of playing airsoft I’ve had the chance to use a wide variety of gloves and in the past 5 years I’ve more or less settled on Mechanix Gear as my go-to gloves of choice. As such, it should be no surprise that I’m very happy with this product.

 

20140604_135457-1Furthermore, I literally JUST got my first set of Multicam BDUs (I’m know I’m way late on this train) and these gloves are going to work perfectly with my new kit, which is not pictured. Mechanix Gear will be coming out with three different version of their gloves: Original, FastFit, and M-Pact. The gloves in this photo are Mechanix Gear Original Multicam gloves and what I normally use are the Mechanix Gear M-Pact gloves which have more protection for the top of my hands. Mechanix FastFit gloves, which I have yet to play-test, have form-fitting stretch panels between your fingers to provide a snug fit and elastic cuffs for easy on and off flexibility between tasks.

looking at the camera at sc village
Me using a set of Mechanix Gear M-Pact 2012 gloves in Tan. Mechanix will be releasing a set of M-Pact gloves in Multicam as well!

Essentially, Mechanix Gear is releasing three different version of their multicam gloves before the end of June 2014 that cover the vast majority of airsoft uses, which is yet another reason to be excited! You will be finally be able to get Multicam gloves from Mechanix Gear and not only that but you will be able to get the version that suits your airsoft mission-specific needs!

20140604_135337

Once again, I’m one happy Bob 🙂

 

-Bob Hildebrand


Manta Weapon Accessories

manta_headerimage2

I have been using Manta weapon accessories as far back as two years ago when I acquired a Manta rail cover at Shot Show 2012. I had already been having issues mounting a few of my pressure switches so when I stopped by the Manta booth I was immediately interested. Since then, I have taken my Manta rail cover all over the United States, both to operations and recreational gameplay and I am happy to report that not only did it never fail me but that it utterly exceeded my expectations. Not only that but I have recently learned that Manta rail covers are being issued for use with the M27 IAR!

2354266
Manta rail cover with pressure switch compartment

Manta weapon accessories work like any other commercially available rail covers do, they snap on over existing rails with one exception, they come with a compartment that can either hold a pressure switch or allow you to route cables connected to your accessories through them. This can take care of a lot of cables jumbling around on the outside of your gun without having to use electrical tape or zip ties. I actually used to wrap excess cables around my gun in order to keep them from flopping around which did work, most of the time, but it made my gun look absolutely hideous.

lm4 5
My KWA LM4 PTS with a Manta rail cover mounted on the left side

I have even used my Manta rail cover to add a pressure switch to my Tokyo Marui AK. This was a last minute modification I used for Tim VS Bob 5 in order to add both a pressure switch as well as a flashlight and to be honest it worked out spectacularly. It may have looked a bit off but I thought it was completely in line with how my rebel forces operate. We don’t have to look good as long as we get the job done!

manta ak
My Tokyo Marui AK with Manta rail cover duct-tape-mounted on the top of the handguard

(more…)


My New Favorite Boots

Capture
My Personal set of Under Armour Tactical Valsetz Boots

I have been using boots purchased at Army/Navy Surplus stores for the majority of my airsoft career. About 6 years ago I purchased some boots online on the advice of my friend and fraternity brother Matt, only to be disappointed by their craftsmanship and lack of ventilation, considering they were desert boots. This led me to refuse to order boots online because I didn’t want to spend any more money on boots until I could try them first hand to make sure I wasn’t throwing money down a hole.

hsp
My UA Valsetz Boots at Hollywood Sports Park’s Combat Center

Little did I know, that I my girlfriend was planning on buying me something special for my birthday and asked me if there was one thing I could have for airsoft what would I buy? So, I told here “I haven’t had a comfortable set of boots in almost a decade, and that’s what I spend most of my time in, so it would have to be a new set of boots.” She asked if there were any specific ones I’d thought about and quite a number of my coworkers had just purchased Under Armour Tactical Valsetz boots from AirsoftGI.com and could not stop talking about them. These same folks would also wear them into work just about every day leading me to believe that they really were as comfy, lightweight, and breathable as everyone had claimed them to be.

rtc 1
My UA Valsetz Boots at Bob’s Rebel Training Camp: Northern Resistance at Gamepod Combat Zone

(more…)